Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who have lost the key to their car could be worried about the expense and inconvenience of adding the new key. There is a solution to avoid these costs by creating your own key fob.
You'll require a phillips screwdriver that is flathead to do this. Insert saab key fob G28CarKeys into the slot located in the middle of the case and slowly push it open.
Cost
Most SAABs have two keys when new, but some used vehicles only have one. In this scenario the owner has to purchase an additional key, and it could be costly. However, there are plenty of ways to cut costs on this procedure. For example, if you simply require a replacement for your key fob case You can save money by buying an older case from an auto dealer. But, be aware that these cases do not include the badge or emergency key, and are prone to wear out quickly.
You also have to pay for the installation and programming of the TWICE module. These expenses can quickly mount up, especially if you don't have a spare.
This is why it is vital to have two keys for your vehicle. This way, if you have lost the only functioning key, you won't be stuck without a means of transportation.
It's not as hard as it may seem to add an additional Saab 9-3 key. The only issue is that you'll need to connect the key to the car's computers. This can be accomplished through an authorized dealer, but it might take a while to schedule an appointment. Luckily, you can locate the information you need on the internet to aid you in the process.
Installation
Most Saab vehicles built after 1995 come with an immobilizer device that uses an electronic key fob to regulate the engine. This system also controls door locks as well as remote functions of the car. It is important to have a spare key available to keep from losing the original and causing your car to be stolen. The good thing is that should you lose your primary working Saab key you can get it replaced without having to pay an expensive dealer service.
The first step is to prepare the new key fob. You can do this by using a flathead screwdriver to pry the case open. Simply insert the screwdriver into a small slot in the middle of the case. Then gently work it. If you're having trouble, try using different angles. After you've opened up the case, you can remove the electronics and place them in a new fob case.
You can begin programming after you have the fob and key replacement. You will need to connect your Tech2 and follow the instructions for NG 9-3 using or without transponder. It is recommended that you use a replacement TWICE unit that is already mated to the correct key using an transponder. You can find this unit on the internet. However, it is important to be sure to use an OEM replacement.
Programming
In general, adding an extra key for Saab 9-3 requires a special tool called Tech 2. Tech 2. It also requires programming the vehicle to recognize the new key. This is a far more complex procedure than simply copying a metal key. It must be done by a professional to avoid damaging the electronic system of the vehicle. If you're thinking about adding a spare key for your car, it's best to do it as quickly as you can. Waiting could lead to higher costs in the future.
You'll also need to replace either the CIM or TWICE modules. This is typically an order by mail and not something that you can do by contacting an aftermarket retailer. Depending on the model of your car it could cost quite expensive.
There's an alternative to the dealer who is charging you top price to replace your car computer. S.A. Locksmith & Security can re-program the EEPROM on your Saab computer and prepare your vehicle for the new key, saving you the cost of a brand new car computer! This service is quick, easy and affordable. You will save as much as 50% on the amount a dealer would charge you. This is an excellent solution for people who have lost their car keys.
Remotes
The Saab 9-3 Viggen is one of the most unique vehicles ever to bear the Saab badge. It was a Scandinavian front-drive fighter jet-inspired beast that was fast as a nut and fun to drive. While a variety of other Saab models were built after it, very few were as unique.
It is crucial to replace your Saab 9-3's key fob as soon as you lose it. In contrast to the more typical European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a unique key to start. The process of replacing the key is easy if you own a spare key, but it can be costly and time-consuming if you don't have an additional key.
You can save money by buying a used replacement key fob and having it programed by a locksmith near you. But, be cautious when purchasing used keys on eBay or other online retailers. They might not be authentic, and you could end paying more in the long run.
Removing the electronics and battery from the old key fob is an easy procedure that anyone can perform using a screwdriver with a small flathead. Be careful not to damage any of the small electronic components that are inside the case. Do not pour liquids into the case since this could cause damage. Moreover, you should never buy a cloned key from any other aftermarket seller since they might not work with your car's CIM.